Intelbras Twibi Force Plug Wi-Fi Mesh Extender

Ideal for expanding the Wi-Fi network coverage area in a simple and practical way, either through traditional repeater mode or via inMesh technology. The Twibi Plug is a versatile product that works in different scenarios, adapting to your preferred way of staying connected. It connects up to 30 devices to Wi-Fi and extends the coverage area of an inMesh network. Additionally, it features traditional repeater mode, enabling it to repeat the Wi-Fi signal emitted by other routers that do not support the inMesh protocol. inMesh: Intelbras’ Mesh Technology. With it, you can expand your Wi-Fi network coverage area with higher quality and greater efficiency in data exchange and connectivity. Compatible with Wi-Force series routers and WiFiber series ONTs. Coverage Area and Connections: Extends your Wi-Fi coverage area by up to 80 m² and connects up to 30 devices, such as Wi-Fi cameras, smartphones, smart TVs, and more*. *Recommended average values. Depending on usage patterns and characteristics such as installation environment and nearby interference, actual performance may vary. Meu Wi-Fi Intelbras App: Easier product setup and intuitive, straightforward remote management of your Wi-Fi network from anywhere. Ethernet Port: The Ethernet port supports speeds up to 100 Mbps for devices connected via cable, such as televisions and computers. Over Wi-Fi, speeds can exceed 100 Mbps thanks to Wi-Fi 5 AC 1200 technology. Unique Rotating Plug Design: Greater flexibility in use, allowing optimal insertion into power outlets or surge protectors. » Wi-Fi 5 AC 1200 Technology: 802.11ac protocol supporting up to 300 Mbps at 2.4 GHz and up to 867 Mbps at 5 GHz. Ideal for internet plans up to 100* Mbps. » Compatible with inMesh technology: Enables expansion of the Wi-Fi coverage area of networks formed by Wi-Force routers, WiFiber ONTs, and other inMesh-compatible products. » Extends Wi-Fi coverage by up to 80*m² and supports simultaneous connections for up to 30* devices. » Meu Wi-Fi Intelbras App: Install and remotely manage your router’s information. » Ethernet Port: Supports connection and data transfer at up to 100 Mbps for devices connected via cable. Over Wi-Fi, data transfer speeds can exceed 100 Mbps thanks to Wi-Fi 5 technology. Technical Specifications: Wi-Fi Coverage Extension: Up to 80 m²* Number of Connected Users: Up to 30 users simultaneously Internet Plan: Above 100 Mbps Standards: IEEE 802.11a/b/g/n/ac – IEEE 802.11k/v (Roaming) Operating Modes: Router / Wireless Repeater / Access Point Radio Mode: MU-MIMO / Beamforming / Band Steering Operating Frequency: 2.4 GHz – 5 GHz Input: 100–240 V AC, 50/60 Hz Maximum Power Consumption: 9 W Dimensions (W × H × D): 8 × 14.8 × 5.5 cm Net Weight: 110 g *Important: The Twibi Plug is not compatible with Twibi Giga, Giga+, or Fast models, except in repeater mode. » Do you know what the inMesh Wi-Fi network is? inMesh is Intelbras’ Mesh protocol. It delivers a high-quality connectivity experience and is compatible with WiFiber, Wi-Force routers, and Twibi Force products. Through this system, you gain flexibility to extend your network coverage area, since you can use products from different lines and models to achieve broader connectivity throughout your home.