Intelbras Router – POWERFUL!!

Modern router with 4 antennas and advanced technologies for greater coverage and stability. Dual-band 2.4 GHz and 5 GHz; Intelbras Action RF 1200 — a trusted brand!! 4 fixed external 5 dBi antennas 4 Fast Ethernet ports — 1 WAN and 3 LAN — 10/100 Mbps LEDs: SYS, Wi-Fi, LAN 1 / 2 / 3, Internet Chipset: Realtek® RTL8197FN + RTL8812BRH Flash Memory: 8 MB RAM: 64 MB RESET/WPS button Wi-Fi button Compatible with Customize portal Wireless Parameters Standards: IEEE 802.11a/b/g/n/ac Radio Mode: MU-MIMO, Beamforming Operating Modes: Router, Repeater, Wireless Client, Access Point Operating Frequency: 2.4 GHz, 5 GHz Bandwidth: 2.4 GHz: 20, 40 MHz 5 GHz: 20, 40, 80 MHz Transmission Rate: 2.4 GHz: up to 300 Mbps 5 GHz: up to 867 Mbps Operating Channels: 2.4 GHz: 1–13 (Brazil) 5 GHz: 36, 40, 44, 48, 149, 153, 157, 161 Maximum Power (E.I.R.P.): 2.4 GHz: 63 mW (18 dBm) 5 GHz: 126 mW (21 dBm) Reception Sensitivity at 2.4 GHz: 802.11b 1 Mbps: –92 dBm 802.11g 54 Mbps: –74 dBm 802.11n 20 MHz MCS7: –71 dBm 802.11n 40 MHz MCS7: –70 dBm Reception Sensitivity at 5 GHz: 802.11a 6 Mbps: –86 dBm 802.11ac 80 MHz MCS9: –61 dBm Security: WPA-WPA2/PSK with TKIP and/or AES encryption LED Descriptions SYS Off: router powered off On: router initializing Blinking: router operating normally Wi-Fi Off: both 2.4 GHz and 5 GHz Wi-Fi networks disabled On: 2.4 GHz and/or 5 GHz Wi-Fi network(s) enabled, but no data traffic Blinking: 2.4 GHz and/or 5 GHz network(s) enabled and data traffic present Slow blinking: WPS in progress, waiting for device connection LAN 1 / 2 / 3 Off: no device connected to the respective LAN port On: device connected to the respective LAN port, no data traffic Blinking: device connected to the respective LAN port, with data traffic Internet Off: no connection on the port On: connection present on the port, no data traffic Blinking: device connected to the corresponding port, with data traffic