Perform low- and high-voltage electrical services, carry out preventive and corrective maintenance to ensure machines, equipment, electrical panels, control panels, low-voltage power distribution networks, appliances, and installations remain in optimal working condition, complying with quality and safety standards. Install conduits for electrical, telephone, and data communication cables; Install electrical and communication cables; Select cables and wires according to the cross-sectional area specified in the project; Identify cables and connections; Measure supply voltage available at the site; Measure current per phase in electrical panels and verify phase balance; Balance loads across low-voltage circuits; Perform work in accordance with the Standard Operating Procedure (SOP); Schedule activities as specified in the Work Order, service order, and repair order. Estimate time required for maintenance, installation, and expansion tasks; Specify personal protective equipment, materials, and tools; Perform work as described in the Work Order issued by the Maintenance Management Software and finalize the Work Order with the executing employee’s signature; Conduct daily inspections of the generator set, uninterruptible power supply (UPS), pumps, and other critical equipment essential to company operations, documenting findings on the Work Order or a dedicated spreadsheet for control purposes. Replace cables, wires, and insulators; Install protective shielding (acrylic or equivalent) on exposed busbars within low-voltage distribution panels. Design cable layouts, install and adapt infrastructure, and upgrade or improve electrical wiring in equipment, machinery, and building and industrial infrastructure installations. Perform preventive and corrective electrical maintenance on machines, equipment, control panels, instruments, motors, pumps, electrical and pneumatic devices, to diagnose faults using schematics, drawings, catalogs, and technical analysis and evaluation, including disassembly, repair, reassembly, testing, and component replacement. **HIGH VOLTAGE:** Re-closing of the main circuit breaker at the electrical service entrance is permitted only upon restoration of power or under other specified circumstances; such tasks must never be performed individually and require two electricians. **PRIMARY SUBSTATION:** Perform general cleaning; inspect internal lighting; verify safety equipment; inspect overall paint condition; examine all hardware, screens, and their grounding. **LIGHTNING PROTECTION SYSTEM:** Tighten all fastenings; verify grounding connections; clean the entire assembly; inspect for oxidation points; conduct thorough porcelain inspection for cracks and fractures. Install and maintain electric motors. 22. Install and maintain auxiliary equipment such as inverters, rectifiers, battery banks, and capacitor banks. 23. Assist in and/or develop maintenance plans for electrical installations and equipment. 24. Install distribution panels; install mounting structures for photovoltaic modules; install photovoltaic modules; install photovoltaic protection and connection boxes; install photovoltaic inverters; install energy storage systems (batteries); install photovoltaic system monitoring equipment. Adapt equipment to the system; Program signal transmitter and receiver equipment; Issue an inspection report with photographs detailing the condition of electrical installations for which Sodexo is responsible; if electrical installations do not comply with NR-10 and NBR 5410 safety standards, specify to the client the necessary corrective actions to achieve compliance. **Requirements:** Relevant work experience. Our job openings are open to diverse talent of all ethnicities, genders, ages, sexual orientations, disabilities, cultures, and other characteristics. Diversity, equity, and inclusion are embedded in our DNA! **Minimum Education Level:** High School Diploma (Secondary Education)